Reset Methods of purge counter for All Brother Printer Models

click here for ----->   video tutorial to reset method

The Manual Reset Methods for Brother Printers

1. Disconnect Brother Printer from power cord.
2. Press Set button and while holding the Set button re-connect the printer to the power cord (electric source).
3. It will display an error message “Machine Error 46″ on the LCD
4. After the Error code appear, press the “arrow up button” ( ^ ) there will be numbers that are going to be display.
5. Choose 8 then press Set Button
6. Press Arrow Up button again then choose Zero (0) and press Set Button Again,now you will enter Service Mode.
7. Press “Mono Key/Button” 25 times or until “Purge Counter Appear”
8. Now press arrow up (^) again then choose “2″ press Set Button
9. Press Arrow Up (^) again then choose “7″ press Set Button
10. Press Arrow Up (^) again then choose “8″ press Set Button
11. Press Arrow Up (^) again then choose “3″ press Set Button
12. The purge counter will be reset to Zero.
13. Now Press Stop/Exit Button
14. The printer will return to “Machine Error 46″ again
15. Press Arrow Up (^) then choose 9 press Set Button
16. Press Arrow Up (^) again then once more choose 9 press Set Button
17. The Printer will reset then wait until it power up again.

Source the tutorial Reset Methods for All Brother Printer Models article is from Indoreset Yahoo Group

other instruction is this method

you need to go to maintenance mode first
press menu/set after that the mono start key and then press the up arrow button 4 times..

i try this all method and it's work 100 percent...

take note:when you resetting the brother you should replace the waste ink pad of the printer..because if you only reset it without making a waste tank outside the printer it will cause flooding of waste inks inside your printer.. And that can cause to damage your printer..

• Printers with a built-in Fax: Hold down MENU/SET/START and quickly press * 2 8 6 4.
• Printers WITHOUT a Fax: Hold down Menu/Set and the Black Start key before pressing the UP arrow four times                                                                                                                                                                                                          Now your printer should say MAINTENANCE on the screen and you are ready to begin the process of actually resetting the purge counter.
• Type in 80 using the numerical keypad.
• 1. Use the DOWN key to locate the purge counter. eg. PURGE0060025
  2. Use the number pad to enter 2783 (this should zero the numbers after PURGE).
  3. Press STOP/EXIT to return to the first stage of maintenance mode.
  4. Press 9 and 9 to exit maintenance mode.
  Your purge counter is now reset and you can now resume printing as normal. If however this has not cleared the error message I advise going through this guide again following the instructions to the letter. If the error persists please let us know.
  
  
  compatible to almost all of the brother printer:Brother MFC-210C, MFC-215C, MFC-3240C, MFC-3340CN, MFC-3342C, MFC-410CN, MFC-420CN, MFC-425CN, MFC-5440CN, MFC-5840CN, MFC-620CN, MFC-640CN, MFC-640CW, MFC-820CW, MFC-235C, MFC-260C, MFC-240C, MFC-3360C, MFC-440CN, MFC-465CN, MFC-5460CN, MFC-5860CN, MFC-660CN, MFC-665CW, MFC-680CN, MFC-845CW, MFC-885CW, MFC-250C, MFC-255CW, MFC-295CN, MFC-297C, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-790CW, MFC-990CW, MFC-J615W, MFC-J220, MFC-J265W, MFC-J410, MFC-J415W, MFC-J430W, MFC-J5910DW, MFC-J625DW, MFC-J6510DW, MFC-J6710D, MFC-J6710DW, MFC-J6910DW, MFC-J825DW